Products
Projected Capacitive Touch Panel
●Adopt G/F/F structure design ●Using laser engraving process ●High penetration (>84%) ●Low impedance design increases touch sensitivity ●Light and thin design ●Borderless full flat design ●Multi-touch input ●7H glass surface hardness |
●Adopt G/F/F structure design
●Using laser engraving process
●High penetration (>84%)
●Low impedance design increases touch sensitivity
●Light and thin design
●Borderless full flat design
●Multi-touch input
●7H glass surface hardness
●Point of sale terminal (POS)
●Office automation equipment
●Industrial automation system
●Retail automation equipment
●Portable computer
●In-vehicle system
●Voting system
●Financial system
●Medical system
mechanical properties
Structure Upper layer: protective glass
Lower layer: Double layer ITO film
Standard glass thickness: 1.1mm, 1.8mm, 2.8mm
Outgoing cable connection FPC (Only)/COF/COB
Size range 4.3"~86" (provide OEM & ODM products)
Tail peeling >600g by 90 degrees, speed 25mm/min
Electrical Characteristics
Operating voltage 3.5V ~ 5V DC
Optical properties
Transmittance is greater than 84%, the size will affect its value
Environmental characteristics
Operating temperature -30°C ~ +70°C, 20% ~ 90% RH at max 50°C
Storage temperature -40°C ~ +80°C, 20% ~ 90% RH at max 50°C
Constant temperature and humidity test 60℃/90% RH, 240hrs, allow panel stays in room temperature for 12 hours.
Hot and cold cycle test -40°C ~80°C, 60 minutes per cycle, a total of 50 cycles, can be tested after 12 hours of return to normal temperature
High temperature test 80°C / 240 hours, can be tested after returning to normal temperature for 12 hours
Low temperature test -40°C / 240 hours, can be tested after returning to normal temperature for 12 hours
certification
Product Certification CE/FCC/RoHS/UL
Durability
Surface hardness ≧7H (JIS K-5400)
Touch up to 10-35 million times